With approximately 52% of all motor failures caused by bearing failure, it is essential to ensure that the bearings are protected from contamination of particulate or moisture. AESSEAL® have models specifically designed for electrical motors that specifically:
- Protect against the main causes of bearing failure
- Meet the requirements of IEEE 841-2021
- Improve electrical safety by preventing water ingress
- Eliminate motor shaft damage
- Are suitable (with an optional AEGIS® grounding ring) for variable frequency drives
IEEE 841-2021 (the standard for electrical motors) requires that electrical motors have an ingress protection rating of IP55 or better. AESSEAL® bearing protectors are the ideal solution to seal the motor shaft offering ingress protection up to IP69K.
Protecting Electrical Motors
Discover an effective way to protect your electric motors and extend your mean time between repair. Watch the video > Protect electrical motors from bearing damageProduct Filter
LabTecta M
Flush Mount Electric Motor Design
This range of products are intended for use as a bearing protection device on electric motors which require flush mounted bearing isolators
LabTecta MG
Flush Mount Electric Motor Design (Grounding Ring)
This range of products are intended for use as a bearing protection device on electric motors which require flush mounted bearing isolators